Basic Stained Glass Patterns Rectangle Easy Painted

Create Your Own Stained Glass Designs

Free stained glass design tutorials to get you started on making your own designs from scratch. Can't draw? No problem. There are lots of ways around it! These free stained glass design tips will get you started in a way that avoids fear.

Designing Cuttable Glass Shapes

Stained glass designing is made trickier for us glassers because of the types of shape we can and can't cut. This has to be thought about during the process of designing stained glass.  And what about those tiny pieces that you want for detail but can't think HOW to incorporate into your design in a practical way?

If you're always yearning to add more details to your stained glass work my Plating Magic (layering) course shows you lots of different ways you can do this. It includes creating shadows with foil and painting details on.

This 3 minute video below shows you a trick way of keeping all those tiny pieces…without having to cut them all out. Watch it and be amazed.

Donna added a note to this which is worth thinking about  – "when I put the overlay on the backside, it was not in the exact same place as the front. Ironically, when held to the light it appeared that a shadow of the deck chair legs was cast on the sand"

Create a Stained Glass Pattern from a Photo

If you do fancy learning how to make stained glass designs, I've put together 5 simple steps that might help you.

1. Stained Glass Design Inspiration

• Photos are always good for inspiration, and can get you past that empty blank page you're faced with at the beginning of a project.
• Find one that interests you. It can either be one you've taken, or one that you've found. I've chosen one I took of a cactus in Lanzarote.

Cactus photograph for design inspiration

• Think about why you chose your photo? What do you like about it? Is it the colour, the shapes, does it make you laugh? Whatever it is you like about your image is what you're trying to capture in your design.
• In the photo above, I liked the contrast of the strong, spiky leaves with the wispy twirly bits at the end. I think it will loosen it up and create a free stained glass design. I also like the light and dark greens, and the energy that brings.

2. Selecting Part Of The Image

It's sometimes easier to choose a section of a photo, rather than the whole thing.

If you tried to pick out all the shapes in this one, there would be hundreds of complicated pieces. It would be too difficult to make, even for someone with lots of experience in stained glass.

Selecting an area to use for the pattern

• Try isolating a section yourself. Either cut out a square or rectangle in a piece of paper and move it over your image until you find a section you like, or do it on a computer.
• Turn your photo upside down and around if you want. This sometimes helps you see something different. It can help you make a free stained glass design that has movement.

3. Making Simple and Free Stained Glass Design Shapes

• Now pick out some simple shapes. I've done it on my computer in the photo below. You could do it by putting tracing paper over your image and tracing some of the shapes that you like.
• The lead or solder lines are your 'drawing'. They are a very strong part of your design. It's best to think about the pattern they make carefully at this stage. I'm trying to get mine nice and spiky here.
• You can see I've also picked out the wispy bits that I liked about the photo at the beginning. They give a bit of 'life' to the design.

Outlining the shapes for the stained glass pattern

4. Colour And Texture In Stained Glass Design

Once you're happy with the shapes, you can start thinking about colour and texture. I always colour in my designs so that I don't make mistakes later and waste the beautiful art glass.

• Make a few photocopies or scan your outline stained glass design. Now work out what colours you want and where to get the balance right at this stage.

Working out color and texture in your design

• If you leave some areas clear, it really makes the stained glass design stand out. It makes the colours 'zing'.
• In thestained glass design above I've tried to create some depth with the dark and light shades.

5. Adding The Stained Glass Design 'Lead Lines'

This is the point that it all comes together.

• Add the lead lines in, along with any details that you want to add – in this case my 'wispy' copper wire. To get this effect, simply solder pieces of bent copper wire to your solder lines after soldering.
• Now you can really get a sense of what your finished panel will look like.

Adding the lead lines to your stain glass pattern

• Make sure you're really happy with your design. You don't want to waste time and money making it in glass if it's not right at this stage.

How To Make Stained Glass Designs – Troubleshooting

Some things to watch out for:

• that the shapes are ones that can be cut out in glass.
• anything that tapers off into a thin point. These are difficult to cut, so widen the ends a bit.
• shapes that don't join up with other shapes. You can't have shapes that stop in the middle of the glass, there must be a lead line to the edge, or to another shape.
• lots of points joining in the same place. They will end up creating a big blob of solder. Try putting a circle where they meet instead.
• concave curves. They're the most difficult shapes to cut as the glass wants to break on the inside of the curve, so don't make them too deep. Try to avoid them altogether for your first piece.
• if you're designing for a window, you need to be working to scale at this point. You don't want to design something long and thin for a short and fat window. See Measuring to learn about taking accurate measurements. Make sure you scale the Sight Size down to fit your sketchbook.

Understanding Perspective

My students don't ask me about perspective. They ask FAR more practical questions like: 'how do I make some items look closer than others?' or 'how big should the cow be?

This 2 minute Video Critique is taken from my Design Magic class.

It shows me explaining how to tweak design student Janet Hartley's work so that each element is the correct size in relation to the others. Perspective, in other words 🙂

I'm not the star of the show by the way – the cows and the barn eclipse me!

Free Stained Glass Designs

I've had a look on the web and have come up with a few of the best sites that offer free stained glass patterns.

1. Spectrum Glass have a lot of designs for hanging panels and sun catchers on this site. There's geese and horses to geometric and abstract patterns.

It's easy to browse through them using the arrows at the top right of the page. They do recommend Spectrum Glass, but of course you can use any type of artglass.

This website is the best one for total beginners, but there are patterns that are for intermediate level.

2. Chantal's Stained Glass. This is a lovely pattern site. Lots of sun catchers, panels, lampshades, boxes and just about everything else! Highly recommended.

There's something here for all levels of skill, from beginners to advanced.

3. Free Stained Glass Patterns. This site has some amazing designs. You can get an idea of what each of them will look like in glass as they are all in color. Scroll down for the pdf to print off. This site is suitable for intermediate to advanced.

Once you have found a pattern you're happy with, you're ready for the next stage, Cutting Templates.

My tutorials for making a copper foil project with your new design are here.

The instructions for making leaded stained glass to realise your design in glass are here.

Choosing Stained Glass Colors –Using Lead Lining

Return to Everything Stained Glass Home Page

becerratroys2000.blogspot.com

Source: https://everythingstainedglass.com/how-to-make-stained-glass-2

Share this post